News - LED Boat Lighting by Rebel Designs



Dec 12th, 2010 We have added a Ratcheting Crimping Tool and electrical supplies to the products page. Watertight/Waterproof connectors in butt, ring and spade terminals.


Dec 2nd, 2010 Rebel Designs released the Micro Rebel RGB LED Controller and strips. This product is available on the products page in the RGB LED strips section. The Micro Rebel RGB LED Controller is designed to control 5 amps per channel 15 amps total. The Micro Rebel RGB LED Controller will handle a maximum of 5 rolls of RGB LED strips. The Micro Rebel RGB LED Controller comes pre programmed with the following colors (red full, red medium, red low, blue full, blue medium, blue low, green full, green medium, green low, white full, white medium, white low, violet, turquoise and orange). Control of the sequence is driven by a single 2 wire momentary switch (not supplied). Controller comes with 4 feet of power cabling. The strips and controller would be perfect for lighting under your gunnels/gunwales or for cove lighting and even under cabinets. Special programming can be provided upon request.

Oct 23rd, 2010 Rebel Designs starts design on the Rebel Pulse a RGB LED strip controller that pulses the lights to the beat of the music. Rebel Designs, is pleased to announce yet another new and innovative RGB LED Controller, the Rebel Pulse is a RGB LED light controller that pulses the lights to the beat of the music. This controller would be great to place in any area on your boat or yacht where you have good music and want to add the effect of pulsing lights to your music. Rebel Designs, is pleased to announce yet another new and innovative RGB LED Controller, the Rebel Pulse is a RGB LED light controller that pulses the lights to the beat of the music. This controller would be great to place in any area on your boat or yacht where you have good music and want to add the effect of pulsing lights to your music. The Rebel Pulse has been designed to operate on 12VDC and will pulse over 16,000,000 different colors in the spectrum along to the beat of your music. The Rebel Pulse has the same great engine as the RGB LED strip controller and can drive 80 feet of RGB strips setup in series and parallel and will also be able to control infinite lengths of RGB LED strips in series with the addition of the RGB Rebel Amplifier.

Oct 6th, 2010 Rebel Designs starts design on a push button RGB LED strip controller Rebel Designs, is pleased to announce a new and innovative RGB LED Controller. This controller for RGB LED strips that Rebel Designs is introducing for lighting your boat or yacht inside or out. Rebel Designs, is pleased to announce a new and innovative RGB LED Controller. This is the newest controller for RGB LED strips that Rebel Designs is introducing for lighting your boat or yacht. Current needs for undergunnel and accent lighting is limited to products that are not IP68 waterproof require a remote control or multiple switches to operate them rendering them useless if the remote get's damaged or lost. Color has been limited to separate strips of red, green, blue and white strips that would be mounted under the gunnels or in coves. The RGB Rebel Controller has been designed to operate on 12VDC and is able to select different colors from the RGB strip by pressing a single momentary switch which also acts as the power on/off switch. The controller is able to produce over 16,000,000 different colors in the spectrum by varying the brightness of each led in the string. The controller will come with the standard program (Red, Green, Blue and White with 3 stage dimming as well as Violet, Turquoise and Orange) installed and can be ordered with a custom program if you want fading or flashing. The RGB Rebel Controller can drive 80 feet of RGB strips setup in series and parallel and will be able to control infinite lengths of RGB LED strips in series with the addition of the RGB Rebel Amplifier.